Welcome to the official website of Luoyang Yixin Environmental Protection Technology Co., Ltd.!
Dedicated to air pollution control
Design, Development, Production, Sales, Installation, and Maintenance Services
15
2022
-
12
Luoyang Industrial Dust Collector Manufacturer: Solutions for Industrial Dust Removal Equipment Blockages
Author：
Luoyang Industrial Dust Collector Manufacturing Plant Industrial dust removal equipment blockage solutions
1. Different dust characteristics cause blockage. For example, dust that is too fine or sticky will cause blockage;
2. Problems with the filter cartridge. Blockage occurs when the filter cartridge is damp.
3. High content of dust gas to be treated causes blockage;
4. Inadequate cleaning of the cartridge dust collector, and a dirty filter core will also cause blockage.
Luoyang Industrial Dust Collector Manufacturing Plant: Industrial dust removal equipment blockage solutions
1. Improve de-ashing work: During the operation of the cartridge dust collector, some dust will accumulate on the surface of the filter core, and this dust must be cleaned regularly;
2. Check the equipment's sealing: Before using the cartridge dust collector, a comprehensive inspection should be carried out to prevent situations such as damp dust collector filter cores and loose casing seals.
3. Equipment installation should be based on the actual situation: Vertical installation is generally easier to clean and maintain;
4. Select dust removal equipment based on the characteristics of the raw materials: Different cartridge dust collectors have limitations on the de-ashing targets they can handle.
Luoyang Industrial Dust Collector Manufacturing Plant: What aspects should be understood when using dust removal equipment?
1. When confirming the performance of the dust removal equipment, the structure of the dust removal equipment and the type and scale of the dust source facilities must be clarified. Specifically, this generally includes the following points and items:
2. Gas flow rate and velocity; gas temperature and humidity; air pressure and equipment flow resistance; gas properties; dust characteristics; dust concentration standards at the inlet and outlet of the dust removal equipment.
3. Dust removal equipment efficiency or compliance rate; dust discharge and transportation methods; insulation, heating or cooling; volume; dust removal equipment filtration system characteristics; dust cleaning methods.
Luoyang Industrial Dust Collector Manufacturing Plant: A brief discussion of the installation steps of a baghouse dust collector
Before using the baghouse dust removal equipment, it is necessary to check that the accessories are complete and effective, and that each component of the equipment is undamaged. Any problems found should be dealt with promptly; during installation, the baghouse dust removal equipment should be placed on a flat and firm ground for greater stability during later operation.
Hold the dust removal bag opening tightly with your hand, while keeping the other parts of the dust removal bag folded, and insert the telescopic part of the dust removal bag into the sleeve to cross the grille. Let the weight of the dust removal bag slowly fix itself, and pull the metal ring out of the sleeve from the top of the dust removal bag. Install the sleeve in the grille hole.
Install the dust removal bag frame in the dust removal bag. During installation, pay attention to slowly placing the frame into the dust removal bag. If there is significant frictional resistance, lift it back up slightly, then gently lower it. If there is still significant frictional resistance, repeat the operation until it can be easily lowered.
Assemble the dust removal bag frame positioning device or fixing component, and ensure that the dust removal bag frame sealing gasket works under appropriate pressure. When the baghouse dust collector is installed outdoors, the air purification pressure relief, pulse solenoid valve, and single pulse jet control board must be protected by a rain shelter or covered.
The company mainly produces various dust removal, desulfurization, denitrification, VOCs waste gas purification, wastewater treatment, noise reduction, complete sets of industrial electrical control systems and equipment, and researches and develops waste gas, wastewater, waste residue, and noise treatment equipment.
Contact Us
Telephone:+86-379-67323008
Phone:+86-5824998401
+86-9838965599
Email:yx23008@163.com
Address: Xin'an County Economic and Technological Development Zone, Luoyang City, Henan Province
