Welcome to the official website of Luoyang Yixin Environmental Protection Technology Co., Ltd.!
Dedicated to air pollution control
Design, Development, Production, Sales, Installation, and Maintenance Services
28
2022
-
11
Luoyang Industrial Dust Collector Manufacturer: Solutions for Industrial Dust Removal Equipment Blockages
Author：
Luo Luoyang Industrial Dust Collector Manufacturing Plant Introduction to solutions for industrial dust removal equipment blockages:
1. Blockages caused by different dust characteristics, such as dust that is too fine or sticky;
2. Problems with the filter cartridge, blockages can occur when the filter cartridge is damp.
3. Blockages caused by high concentrations of dust-laden gas that need to be addressed;
4. Inadequate cleaning of the cartridge dust collector, excessively dirty filter cartridges can also cause blockages.
Luoyang Industrial Dust Collector Manufacturing Plant: Solutions for industrial dust removal equipment blockages
1. Improve de-ashing work: During operation of the cartridge dust collector, some dust will accumulate on the surface of the filter cartridge, and this dust must be cleaned regularly;
2. Check equipment sealing: Before using the cartridge dust collector, a comprehensive inspection should be carried out to prevent situations such as damp dust collector filter cartridges and loose housing seals.
3. Equipment installation should be based on the actual situation: Vertical installation is generally easier to clean and maintain;
4. Select dust removal equipment based on raw material characteristics: Different cartridge dust collectors have limitations on the de-ashing targets they can address.
What aspects should be understood when using dust removal equipment?
When confirming the performance of dust removal equipment, the structure of the dust removal equipment and the type and scale of the dust source facilities must be clarified. Specifically, this generally includes the following points and items:
Gas flow velocity and flow rate of the dust removal equipment; gas temperature and humidity; air pressure and equipment flow resistance; gas properties; dust characteristics; dust concentration standards at the inlet and outlet of the dust removal equipment.
Efficiency or compliance rate of dust removal equipment; dust discharge and transportation methods; insulation, heating or cooling; volume; dust removal equipment filtration system characteristics; dust cleaning methods.
Brief discussion of the installation steps of a baghouse dust collector:
Luoyang Industrial Dust Collector Manufacturing Plant indicates that, Before using baghouse dust removal equipment, it is necessary to check that the accessories are complete and effective, and whether each component of the equipment is damaged. Any problems found should be addressed promptly; during installation, the baghouse dust removal equipment should be placed on a flat and stable surface for greater stability during subsequent operation.
Hold the mouth of the de-ashing bag firmly, while keeping the other parts of the de-ashing bag folded, and insert the telescopic part of the de-ashing bag into the sleeve to cross the grid. Let the weight of the de-ashing bag slowly fix the point, and pull the metal ring out of the sleeve from the top of the de-ashing bag. Install the sleeve in the grid hole.
Install the de-ashing bag frame in the de-ashing bag. During installation, care should be taken to slowly place the frame into the de-ashing bag. If there is significant frictional resistance, it should be lifted slightly and then gently lowered. If the frictional resistance is still significant, repeat the operation until it can be easily lowered.
Assemble the de-ashing bag frame positioning device or fixing component, ensuring that the de-ashing bag frame sealing gasket works under appropriate pressure. When the baghouse dust collector is installed outdoors, the air purification pressure relief, pulse solenoid valve, and single-pulse jet control board must be protected by a rain shelter or cover.
The company mainly produces various dust removal, desulfurization, denitrification, VOCs waste gas purification, wastewater treatment, noise reduction, complete sets of industrial electrical control systems and equipment, and researches and develops waste gas, wastewater, waste residue, and noise treatment equipment.
Contact Us
Telephone:+86-379-67323008
Phone:+86-5824998401
+86-9838965599
Email:yx23008@163.com
Address: Xin'an County Economic and Technological Development Zone, Luoyang City, Henan Province
